Audi S4 + Introduction + Governing bodies and methods of safe operation - Current leaving and service Specifications Maintenance approach term indicator Schedule of routine maintenance General information on control Check of levels of liquids, control of leaks Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels Replacement of motive oil and oil filter Checks of the brake system. Adjustment of the parking brake Check of fuel system Check of a state and replacement of hoses of a motive compartment, localization of leaks Check of a condition of ridge belts of the streaming drive of auxiliary units Check of functioning of the cooling system and frost resistance of cooling liquid Check of a condition of system of production of the fulfilled gases Check of level of oil of automatic transmission Visual control of a box of gear shifting and the main transfer on leaks, check of level and addition of oil Check of a state component of a suspension bracket and steering Check of a condition of protective covers of power shafts Check of level of liquid of system of hydrostrengthening of a wheel Check of the air conditioning system Lubricant of limiters of doors, cylinders of locks, hook of a cowl, movable panel of the hatch of a roof Visual control of a seat belt and block of a safety cushion Check of operability of headlights and horn Check of a state, adjustment and replacement of brushes of screen wipers Check of a condition of the battery, care of it and charging Replacement of the battery of emergency supply of the Telematik system Replacement of an element of the filter of air of salon / coal filter of purification of air Replacement of brake fluid Check and replacement of spark plugs. Check of a condition of high-voltage wires Replacement of an element of the air filter of the engine Replacement of the fuel filter Check of a state and tension of a gear belt + Engine + Cooling systems, heating and air conditioner + Power supply systems, release and decrease in toxicity of the fulfilled gases + Systems of electric equipment of the engine + Manual box of gear shifting + Automatic transmission + Coupling, power shafts and differential + Brake system + Suspension bracket and steering + Body + Onboard electric equipment
|
Visual control of a seat belt and block of a safety cushion
|
- Completely extend a seat belt and check a tape for availability of the damaged threads.
|
|
- Damages can be a consequence, for example, of jamming of a belt or influence of the burning cigarette. In this case the belt should be replaced.
- In the presence of mastications without signs of damage of threads it is not necessary to replace a belt.
- The belt having the heavy course should be checked for twisting. If necessary it is necessary to remove facing on the central rack.
- If the automatic machine of taking-up does not work, the belt needs to be replaced (work HUNDRED).
- The tape of a belt can be cleared only soap and water. It is not necessary to apply for this purpose solvents or chemical cleaners at all.
- Check installation sites of safety cushions for existence of damages.
- You clean a surface of a steering wheel and panels under which knots of inflatable safety cushions are located the dry or moisturized with water rag.
|
|
|
It is not allowed to paste over or fit any material a steering wheel and the surface of the forward panel on the right. |
|
|