Audi S4

since 2000 release

Repair and operation of the car



Audi S4
+ Introduction
+ Governing bodies and methods of safe operation
- Current leaving and service
   Specifications
   Maintenance approach term indicator
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of motive oil and oil filter
   Checks of the brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a condition of ridge belts of the streaming drive of auxiliary units
   Check of functioning of the cooling system and frost resistance of cooling liquid
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting and the main transfer on leaks, check of level and addition of oil
   Check of a state component of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of the air conditioning system
   Lubricant of limiters of doors, cylinders of locks, hook of a cowl, movable panel of the hatch of a roof
   Visual control of a seat belt and block of a safety cushion
   Check of operability of headlights and horn
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of emergency supply of the Telematik system
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Replacement of brake fluid
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
   Check of a state and tension of a gear belt
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


4affa92a



Maintenance approach term indicator

Service according to the schedule of Longlife

Intervals of service are displayed on the digital display located on the control panel during 5 from later inclusion of ignition.

Thanks to use of oil, special, resistant to aging, intervals of service of the engine are increased.

The driver is warned for 2000 km or in one month prior to service term by the message of the SERVICE IN 2000 km xxx TAGEN indicator ("SERVICE THROUGH 2000 km ххх DAYS") after each inclusion of ignition. The run rest before service, can be at any time caused on the indicator after pressing of a key (1).

At approach of term of service the message "SERVICE appears!". After that it is necessary to carry out service.

After carrying out service the indicator has to be dumped for new counting. It is carried out by means of the V.A.G-1551 or VAS-5051 device.

If within service or repair in the engine the oil which is not meeting standards of Longlife VW/AUDI is filled in it is necessary to switch system from service, "flexible" on the "tough" schedule. According to the tough schedule service is made each 15000 km or 12 months. Switching of the indicator of service is made by keys of the control panel.

For preservation of flexible hours of service the indicator has to be nullified by means of the VW/AUDI diagnostic unit (work HUNDRED).

HUNDRED AUDIS in addition, at each inspection, carry out a survey of memory of malfunctions of electronic control units of the engine, ABS, a safety cushion and blocking from stealing by means of the V.A.G-1551 device. Therefore it is expedient to visit HUNDRED through regular periods even if maintenance is made by own forces. Poll of memory of malfunctions is carried out by connection to the diagnostic socket. At the same time it is possible to nullify the service term indicator also if necessary.

Zeroing of the indicator of intervals THAT after carrying out maintenance

Perhaps by means of the key located in the control panel. Thus switching of the indicator of intervals THAT from the "flexible" schedule on "rigid" is made.

Switching to the tough schedule of intervals of service:

 PERFORMANCE ORDER

  1. Make sure that ignition is switched off, if necessary, switch off ignition.
  2. Press and hold a key (1).
  3. At the pressed key include ignition, without starting the engine.
  4. After a key otpuskaniye on the display the message "SERVICE IN appears???? km" ("SERVICE THROUGH???? km") or "SERVICE!".
  5. Key of dumping (2) hold pressed until the message "by SERVICE IN - - - - Tagen" ("SERVICE THROUGH — — days") or "SERVICE!" will not disappear.

If the key is not pressed during 5 with, then the mode of dumping is automatically switched off.

  1. Switch off ignition.

You make dumping of the indicator of intervals of service only at once after its carrying out, otherwise it will lead to wrong messages.