since 2000 release
Repair and operation of the car
+ Governing bodies and methods of safe operation
- Current leaving and service
Maintenance approach term indicator
Schedule of routine maintenance
General information on control
Check of levels of liquids, control of leaks
Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
Replacement of motive oil and oil filter
Checks of the brake system. Adjustment of the parking brake
Check of fuel system
Check of a state and replacement of hoses of a motive compartment, localization of leaks
Check of a condition of ridge belts of the streaming drive of auxiliary units
Check of functioning of the cooling system and frost resistance of cooling liquid
Check of a condition of system of production of the fulfilled gases
Check of level of oil of automatic transmission
Visual control of a box of gear shifting and the main transfer on leaks, check of level and addition of oil
Check of a state component of a suspension bracket and steering
Check of a condition of protective covers of power shafts
Check of level of liquid of system of hydrostrengthening of a wheel
Check of the air conditioning system
Lubricant of limiters of doors, cylinders of locks, hook of a cowl, movable panel of the hatch of a roof
Visual control of a seat belt and block of a safety cushion
Check of operability of headlights and horn
Check of a state, adjustment and replacement of brushes of screen wipers
Check of a condition of the battery, care of it and charging
Replacement of the battery of emergency supply of the Telematik system
Replacement of an element of the filter of air of salon / coal filter of purification of air
Replacement of brake fluid
Check and replacement of spark plugs. Check of a condition of high-voltage wires
Replacement of an element of the air filter of the engine
Replacement of the fuel filter
Check of a state and tension of a gear belt
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Types and volumes of the applied lubricants and liquidsDo not allow children to operational materials. At their hit in the child's organism immediately see a doctor.
Apply the materials recommended by the producer, it is a condition of implementation of guarantee certificates.
Volume, when replacing together with an oil filter, l
RKPP and differential
Synthetic oil of the AUDI "G of 052 911 A" specification. Viscosity 75W 90 on SAE
Differential of all-wheel drive models with RKPP
1.5 l of VW/AUDI-G052 145 oil
1 l, FMVSS 116 DOT 4
G 002 000 liquid
A2 G 052 300 oil (180±10 cmi), R134a coolant (480-530 гр.)
Mix of antifreeze and bezizvestkovy water
"G 012 A8D" (red color) or another, VW/AUDI-TL-774-D meeting standard, for example "Glysantin-Au-Protect/G30". It is allowed to apply "G12" (TL-VW-774-F) of lilac color. G12-lila antifreeze (lilac) can mix up with G12-rot antifreeze (red). On the 8-cylinder engine - only "G12 Plus"
Composition of cooling liquid
Antifreeze share in cooling liquid for ensuring frost resistance
Hinges of equal angular speeds
G 000 603, G 000 633 or G 000 605 lubricant, depending on diameter of the hinge (address materials of the Head Stsepleniye, power shafts and differential)
Lubricant of runners of the panel of the hatch of a roof, loops of doors and cowl, cylinders of locks
Audi-G 052 778 A2
Lubricant of loops of a trunk lid (model of 2002 of the issue)
Aerosol VW/AUDI G 000 115 A2 oil
Glass - and a faroomyvatel
Add stekloomyvayushchy means to water during the whole year for prevention of formation of stains. Choose composition of mix according to temperature of external air. Prepare mix in a separate vessel. Thanks to existence of heating of windscreen washer the concentration of mix providing frost resistance to -10 °C is sufficient.
Unleaded gasoline: AI-95/A-85 is not worse. Perhaps temporary use of unleaded gasoline is not worse than AI-91/A-82.5. At the same time engine capacity will decrease a little, at increase in fuel consumption
Do not apply additive to fuel. They can result in the increased wear or damage of the engine.
Summer and winter diesel fuel
Do not apply ship (Marine Diesel Fuel), diesel fuel boiler, etc.
When using diesel fuel with the content of sulfur over 0.5%, you make replacement of motive oil each 7500 km.
Winter fuel, provides normal working capacity to -20 °C.
Thanks to preliminary heating of fuel at the included system of heating of the car, the car on winter diesel fuel can be operated, as a rule, without refusals at a temperature of external air up to -25 °C.
Do not add gasoline to diesel fuel.
In case of use of summer diesel fuel, and also at a temperature of external air below -15 °C it is necessary to add certain, depending on temperature of external air quantity of means for improvement of fluidity or kerosene to fuel.
Composition of mix
Means for improvement of fluidity can be used also in combination with kerosene.
You can receive the certificate of funds for improvement of fluidity for HUNDRED.
Additive share taking into account temperature of external air has to be minimum.
The kerosene share in mix has to make no more than 50%.
Add additive to diesel fuel before loss of property of fluidity of diesel fuel owing to release of paraffin. Faults owing to release of paraffin can be rectified only heating of all power supply system.
You carry out mixing of diesel fuel with kerosene only in the fuel tank. For this purpose in a tank at first fill in kerosene, and then add diesel fuel.
After that the engine has to work some time in order that mix was distributed on all power supply system.
Tires and disks
The used tires and pressure of air in tires forward//back wheels
The required air pressure in tires is specified also in the plate on inside of a cover of the hatch of the fuel tank or at the rack basis In from the driver.
Sizes of disks/Depth of a press fitting, mm
Efforts of tightening of threaded connections, NanometerThe moments of an inhaling of fixture are given also in the text of the Head and on some illyustratsiyakh*.
* The moments of an inhaling highlighted in the text in bold type are subject to exact observance; the efforts which are not highlighted in bold type are given only approximately.