Audi S4

since 2000 release

Repair and operation of the car



Audi S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures when carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   - External equipment
      Installation of the forward panel in situation for maintenance
      Removal and installation of a cover of a water-collecting compartment
      Removal and installation of a front bumper
      Removal and installation of a loker of a back wing
      Removal and installation of a loker of a forward wing
      Removal and installation of a forward wing
      Removal and installation of a rear bumper
      Removal and installation/adjustment of a cowl
      Removal and installation of a cable of the drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and installation of a door
      Adjustment of a door
      Removal and installation of a frame of a window of a forward door
      Removal and installation of a window regulator
      Removal and installation of the electric motor of the drive of a window regulator
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a trunk lid
      Removal, installation and adjustment of a trunk lid
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Station wagon)
      Removal and installation of a door of a back (Station wagon)
      Removal and installation of the lock of a door of a back (Station wagon)
      Removal and installation of an external mirror
      Removal and installation of moldings
      Removal, installation and check of the movable panel of a roof
      Removal and installation of an overlay of the movable panel of a roof
      Check and adjustment of a starting position of the movable panel of a roof
      Removal and installation of a sealant of the movable panel
      Replacement of elastic bands of brushes of a screen wiper
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of screenwash
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets of a faroomyvatel
      Adjustment of levers of a screen wiper
   + Equipment of salon
+ Onboard electric equipment


4affa92a



Removal and installation of a rear bumper

Rear bumper

Instruction: Removal and installation on the Sedan models is carried out similarly. Unlike the Station wagon models there are no basic and sealing levels (7), (9), and also a support (14).
1 — Two bolts
2 — Loker of a wing
3 — the Nut
4 — the Nut
5 — the Guide
6 — Six clips
7 — the Basic level
8 — the Bolt

9 — the Sealing level. It is inserted into a bumper
10 — the Decorative level. It is inserted into a bumper
11 — the Side sealing level. It is inserted into a bumper
12 — the Bumper
13 — Two bolts
14 — the Support. At installation of a new bumper it has to be replaced.
15 — the Shock level
Instruction: The shock level is fixed on a rear bumper by a bilateral adhesive tape. Thereof at removal it collapses.

Versatile person

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.

Some operations are carried out as from the left, and spravy party of the car. The description them is given only concerning one party.

  1. Remove side facing in a cargo compartment, address the Section Removal and installation of facings (Station wagon).
  2. Disunite the loudspeaker socket behind side facing and disconnect a loudspeaker together with the amplifier.
  3. Disunite the socket of parking sensors at the control unit under a back lamp.
  4. Turn off nuts (3) and nuts (4) in a cargo compartment.
  5. Turn out bolts (13).
  6. Disconnect a loker of a wing in a back part.
  7. Turn out a bolt (1) at a guide (5) and remove a side part of a bumper.
  8. By means of the assistant pull a bumper back and remove it.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal.
  2. At installation of a new bumper establish from below a new support (14). Then release a support, having pulled for thread. Thus the support unloads and holds a bumper in relation to a cross-piece.

The support is released when the bumper is completely established.

  1. Attach a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.