- Open a door. Take a cover (5) from an armrest and turn out 2 screws (3).
- Turn out the screw (6), disconnect a decorative level (4) from facing (8) and remove it forward.
- Turn out 4 screws (2). Enter around clips between the panel of a door and facing a plastic wedge and disconnect facing (8).
|
- Disconnect facing of an izrama of a door a little, extend a cable (1) of the drive of a door from a guide (2) and disconnect it.
|
|
- Disconnect a negative cable (-) of the rechargeable battery.
|
|
|
- Disunite the socket of the control unit of a window regulator.
- Disunite the loudspeaker socket.
- Remove facing from a door frame.
|
